INDEX  
  Building the HKM 1:2.5 ASW 28
Rick Briggs
02/11/2007
 
     
  R/C Equipment  
 

I fashioned a switch platform and flat surface for the RX and Power Box System from light ply. I made holes in the standoffs for wires to pass through.

The aerotow release is a simple assembly with a Hitec 5645, I left access for balancing the C/G.

Batteries are mounted with velcro, as is all the R/C gear.

  
         
    Here you see the bulkhead and servo for the aerotow release. I left room for adding weight for C/G .

 
         
    Looking down on the switch and charge jacks. Also you see the batteries, Power System and Rx. As you can see there is plenty of room under the seat tray for all the R/C gear.  
         
    Looking forward, the switch platform is light ply with lightnig holes for the wiring to pass through.  
         
    The finished switch, charge jack and battrie LED platform.  
For questions or to report a problem email webmaster.