ASW 28 INDEX / ARTICLES INDEX

Building the HKM 1:2.5 ASW 28
Rick Briggs

R/C Equipment

I fashioned a switch platform and flat surface for the RX and Power Box System from light ply. I made holes in the standoffs for wires to pass through.

The aerotow release is a simple assembly with a Hitec 5645, I left access for balancing the C/G.

Batteries are mounted with velcro, as is all the R/C gear.
Photo: Rick Briggs Here you see the bulkhead and servo for the aerotow release. I left room for adding weight for C/G .
Photo: Rick Briggs Looking down on the switch and charge jacks. Also you see the batteries, Power System and Rx. As you can see there is plenty of room under the seat tray for all the R/C gear.
Photo: Rick Briggs Looking forward, the switch platform is light ply with lightnig holes for the wiring to pass through.
Photo: Rick Briggs The finished switch, charge jack and battrie LED platform.